MX UTV
Choosing
“RPM”
(left image below) you can set RPM threshold value (up to 16.000)
that switches on each LED so to know when up-shifting.
Choosing
“OFF”
the central LED bar is disabled (right image below).
Alarm LEDs:
manages the lateral LEDs corresponding to “1” and “2” screen prints that
can be configured as alarms (image below).
In this page (left image below) you can link each LED to one of the channels supplied
by your vehicle ECU. As you see in addition to the usual ECU channels, MX UTV sup-
plies three average belt temperatures, to say:
n
BeltTAvg15: belt average temperature in the last 15 minutes
n
BeltTAvg60: belt average temperature in the last 60 minutes
n
BeltTAvg190: belt average temperature in the last 190 minutes
select
any
channel you want to set an alarm for and press “EXIT”.
Setup option appears to let you set switching on threshold, LED colour and blinking
frequency (right image below).
20
21
CHAPTER 5
Please note
: switching on threshold is usually a max value (left image below) except
for vehicles with Yamaha ECU where oil pressure alarm threshold can be set as min
value (right image).
MANUALE MX UTV 1.00 2018.qxp_Layout 1 05/04/18 12:00 Pagina 23