17 - Specification
Trigger Input
97
TGR2050 Series Instruction Manual
Trigger Input
Rear panel BNC accepts logic trigger signal for sweeps and modulation.
Trigger logic threshold:
+1.6V
Remote Control Interfaces
Full digital remote control facilities are available through the USB, LAN and GPIB (optional)
interfaces using a SCPI style command set.
USB:
Standard USB 2.0 hardware connection. Operates as a virtual COM
port.
LAN:
Ethernet 100/10base-T hardware connection.
GPIB (optional):
Conforming with IEEE488.1 and IEEE488.2
Settling time from remote command:
Frequency settling time to within 100Hz or 0.1ppm of final
frequency if greater:
<=15 ms typ <7ms
Amplitude settling time to within 0.2dB:
<=15ms typ <4ms
USB Host Interface
Front panel USB host interface for connection of USB Flash drives. Allows unlimited storage
and transfer of instrument setups, sweep lists and user defined modulation patterns.
Connector type:
Standard USB type A
Option TGR-U01
Makes available all digital modulation schemes with full trigger and SYNC capabilities listed
under ‘DIGITAL MODULATION’ above.
General
Power:
85…264Vac, 47…63Hz, 35VA max. Installation Category II.
Standby <0.5W
Display:
4.3 inch (10.9 cm) backlit TFT LCD, 480 x 272 pixels total, 16 colours,
resistive touch screen.
Data Entry:
Multiple entry methods; keyboard or touch screen selection of all major
functions; edit field selection by screen touch or rotary control; value
entry by keyboard, rotary control or touch screen; frequency and
amplitude adjustable by value entry, character scrolling, user defined
step values or a combination.
Storage:
4G bytes internal storage available for 1000’s of instrument setups,
sweep lists and user defined modulation patterns.
Operating Range:
+5°C to +40°C, 20 - 80% RH
Storage Range:
–20°C to + 60°C
Environmental:
Indoor use at altitudes up to 2000m, Pollution Degree 2.
EMC:
Complies with EN61326
Safety:
Complies with EN61010-1
Size:
2U high, half rack width.
Weight:
3 kg
Options:
19-inch rack mounting kit.
