Aim-TTI TGR2050 Series, Instruction Manual

Page: 77 / 100

13 - Utility menu
Print Screen
76 TGR2050 Series Instruction Manual
Print Screen
To access the print screen function, press the UTILITY button, followed by Print
Screen .
Enabling the print screen function
The print screen function allows screen shots to be saved to the internal memory as
bitmap files. These can be exported to an external drive using the stores menu, for
more details see ‘Copying an internal file to an external flash drive’.
Taking a screen shot
To take a screen shot, firstly the function must be enabled, once enabled this will
stay active until disabled. To enable the print screen function, touch Enable .
Screen shots can now be captured for any screen within the user interface.
To capture a screen shot, press and hold the ESCAPE key on the front panel until a
beep is heard and PRT SCRN appears in the status bar. The screen shot has now
been saved to the internal memory.
Naming the file
The file will be saved with the default prefix name IMAGE alongside an index
number e.g. 001. Resulting in the complete file name being IMAGE001.BMP.
To change the prefix, select the Prefix parameter window. A name of up to 5
characters can be entered using the on - screen keypad, enter the required prefix and
touch OK .
To change the index number, select the Index parameter window. Up to three digits
can be entered, enter the required number and touch OK . The index number works
as a counter and each screen shot will take the next consecutive number.
Touching
Reset will bring up a decision box with the following options:
‘Reset file Name- Prefix, index or both?’
NOTE
If a file name has already been used, the file will not save.