Aichi SP12C, Operation Manuals

Page: 28 / 54

Chapter 4 - Part Names
20
(18) Fuel level light
This light goes on when the fuel level is
low. Refill with fuel when this light goes
on.
(19) Overload warning light
When the platform is overloaded, this light
blinks, the alarm buzzer sounds and all of
the functions are disabled.
(20) Not used
(21) Tilt light
When the machine tilts more than max.
allowable tilt angle, this light blinks, the
alarm buzzer sounds and platform elevate
function is disabled.
(22) System failure light
This light goes on or blinks in the event of
a computer control system failure.
CAUTION
Stop using the machine and contact
Aichi service shop for inspections, if this
light goes on or blinks.
(23) Air filter clog light
This light goes on when the air filter is
clogged. Clean or replace the air filter
element, f this light goes on while the
engine is in motion.
(24) Charge light
After starting the engine this light goes off,
check the charging system, e.g. alternator
and fan belt, if this light goes on while the
engine is in motion.
(25) Water temperature light
When the engine cooling water
temperature goes up abnormally, the
engine stops and this light goes on to
protect the engine from overheat. This
light stays off when the engine key switch
is just turned to the “LOWER” control
position.
CAUTION
If this light goes on during operations,
stop using the machine and check the
engine cooling system, e.g. shortage of
cooling water and broken fan belt.
DANGER
When the engine is overheated, do not
remove the radiator cap, as the heated
water will splash out, resulting in scald.
(26) Oil pressure light
After starting the engine, this light goes
off. Check the engine lubrication system,
e.g. shortage of engine oil, if this light goes
on while the engine is in motion.
(27) Pre-heat light
This light goes on when the engine key
switch is turned to the LOWER control or
PRE-HEAT position and goes off when the
preheating is completed.