Chapter 8 - Operation
28
06-06
Fuel level light
fig. 8-5
NOTICE
• If the fuel level light is on, add fuel (Refer
to Chapter 12 for details).
• The capacity of the fuel tank is 120 liters.
(5) Starting the engine from the upper control
panel
Turn the key switch to "UPPER CONTROL."
Operate the engine start switch with the
foot switch depressed to start the engine.
06-04
Engine start switch
fig. 8-6
NOTICE
• When the key switch is turned to “UPPER
CONTROL,” the engine failure light on
the upper control panel will be lit.
• Engine failure light
After the engine starts, rotations will
increase, and the engine failure light will
turn off. If it lights while traveling, there
is an engine-related problem.
• Concerning engine-related problems,
the defective part can be identified using
the indicator lights on the lower panel. If
the charge light, the water temperature
light, the engine oil pressure light, or
the air cleaner clog light is lit, stop using
the machine, and refer to the separate
engine manual to check the problem.
2. Stopping the engine
(1) Idle the engine for about 3 minutes
(2) Push the emergency stop button, or turn
the key switch to “OFF.”
M082L820
Emergency stop button
Key switch
fig. 8-7
Summary of Contents for SP12C
Page 1: ...Models SP12C SP14CJ Operation Manual NOTICE Read this manual before operating ...
Page 3: ......
Page 4: ......
