AIC SB401-VG, User Manual, Page: 84 / 91

75
Chapter 6. RAID Configuration
6�2�2 Delete a Hot Spare Disk
Delete a global hot spare disk.
Procedure
Step 1: Access the Manage Hot Spares window by following the first five steps of
Section 1.2.1 .
Step 2: Select a hot spare disk to delete and press C .
Step 3: Select Save changes and then exit this menu to complete the deletion of the hot
spare disk. The configuration utility pauses while it removes the global hot spare.
6�3 Other Configuration Tasks
This section explains how to perform other configuration and maintenance tasks for
mirrored arrays.
6�3�1 View Array Properties
View the RAID properties of a mirrored array.
Procedure
Step 1: In the Select an adapter from the adapter list.
Step 2: Select
RAID Properties . The Select New Array Type window will appear.
Step 3: Select View Existing Array .
6�3�2 Run a Consistency Check
Use the Consistency Check command to verify that the data is synchronized on the
mirrored disks in the array.
Run a consistency check on a selected mirrored array:
Procedure
Step 1: Select an adapter.
Step 2: Select
RAID Properties and press Enter.
Step 3: Select View Existing Array . If necessary, press Alt + N to switch to another array on
this adapter.
Step 4: Select
Manage Volume . The Manage Volume window will appear.
Step 5: Select Consistency Check in the Manage Volume window.
Step 6: Press Y to start the consistency check. The consistency check will run in the
background. If it encounters any data miscompares, it will stores the information in
a bad block table.