10. Programming With Programming-Menus
10.3 Sensor Programming
As all ALMEMO
®
instruments contain the whole sensor programming stored in
the ALMEMO
®
connector plug, the user, usually, does not need to perform any
programming. Only if, for example, sensor errors must be corrected or existing
sensors must be scaled or limit values need to be specified the comprehensive
programming options have to be used.
If the corresponding sensor connector is
connected all parameters of a channel can
be checked and entered or changed via key-
pad in the menu
SENSOR PROGRAMMING
. It
must be considered that standard sensors
are, by a locking mode, protected against un-
intentional modification and that the locking
level must first be reduced before desired
changes can be performed (s. 10.3.4). The
functions are only selectable as far as the
locking mode allows, the rest appears in
grey.
Output of the sensor programming of all active
measuring points (command P15 s. man. 6.2.3)
with key:
<PRINT>
10.3.1 Selecting the Input Channel
To query or to program the parameters of a sensor, it is first necessary to
select the menu
SENSOR PROGRAMMING
and then to set the required input
channel by using the key
or
. For this, only connected sensors and
activated channels will be considered. To be able to activate new channels, the
key
<MALL>
can be used to enable the selection of
all
channels. The key
<MACT>
can be used to reduce the selection back to the
active
channels only.
The corresponding connector number will be displayed with each input
channel.
Menu
SENSOR PROGRAMMING
:
Indication of connector number and channel:
Connector:0 Channel:00
Selecting the next input channel using the key:
Selecting the previous input channel using the key:
Enabling the selection of all available channels:
<MALL>
Reducing the selection to all active channels:
<MACT>
52 ALMEMO 2690-8
* SENSOR PROGRAMMING *
±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±
Connector: 0 Channel: 00
Comment:
Temperatur
Averaging mode:
CONT
Locking mode:
5
7 Limit max:
35.0 °C
7 Limit min:
-----
5 Base:
-----
5 Factor:
-----
5 Exponent:
0
4 Zero correct.:
-----
4 Slope correct.:
-----
2 Dimension:
°C
1 Range:
NiCr
MALL M PRINT ESC
