Times and Cycles
The continuous storage and the continuous output of the measured values can
be activated with the conversion rate using the following two functions.
Function Conversion rate:
Input s. 8.5
Conv. rate: 10M/s
half-continuous measuring point scan (basic setting):
<OFF>
Cont:
-
continuous measuring point scan:
<ON>
Cont:
Ø
continuous storage off:
Storing:
-
activate continuous storage:
<ON>
Ø
continuous output off:
Output: -
activate continuous output:
<ON>
Ø
At a conversion rate of 50 measurements/sec. the following limita-
tions due to shortened analysation times are to be considered:
1. The increased conversion rate only takes effect after the start of
a measurement, before the device works with 10 measure-
ments/sec.
2. During the measurement with high measuring rate, a supervisi-
on of the ALMEMO
®
connectors is no longer possible, i.e. the
connector configuration can only be changed when the measu-
ring is stopped.
3. If the conversion rate is over 10 measurement/sec, a suppressi-
on of mains frequency noise is normally not possible. Therefore,
the accuracy can be additionally disturbed by irradiations in the
connection cables (twist, if possible!).
10.1.4 Time and Date of Start, Time and Date of End
A sequence of measurements can, at certain points in time, be automatically
started and stopped. For this purpose the start time and date and the end time
and date can be programmed. If a date has not been specified the measure-
ment will be performed every day in the defined period. The current time must
be programmed beforehand.
Function Start Time
(format
hh:mm:ss
):
Start time: 07:00:00
Function End Time
(format
hh:mm:ss
):
End time: ------
Function Start Date
(format
dd:mm:yy
):
Start date: 01.05.00
Function End Date
(format
dd:mm:yy
):
End date: ------
To clear values, select function and then use:
<CLR>
If the start time of a measurement has been pro-
grammed, the status line will show the symbol:
´
l©
´
If the end time of a measurement has been pro-
grammed, the status line will show the symbol:
´
©l
´
ALMEMO
®
2690-8
47
