Programming With Programming-Menus
10. PROGRAMMING WITH PROGRAMMING-MENUS
Apart from the measuring functions you have
already get to know some functions for pro-
cess control and sensor programming in the
measuring menus.
Here in the
PROGRAMMING Menus
you find a
complete and systematic list of all program-
ming functions.
From the measuring menu, you reach the
selection menu using the key:
<MENU1>
For some programming function, there are
additional
ASSISTANT Menus
.
10.1 Times and Cycles
All time functions for measurement, process
control and recording are combined in the pro-
gramming menu
Times - Cycles
and can
also be programmed there.
10.1.1 Time and Date
The ALMEMO 2690-8 is equipped with a real time clock with date function for
recording the measuring time. It has a lithium battery so the time and date are
also maintained after battery change. By selecting the function (s. 8.4) the time
can be programmed in the specified format in the first line on the left side and
the date on the right side (s. 8.5).
Function Time and Date:
Time: 12:34:56 Date:01.05.00
Format of time and date:
hh:mm:ss dd.mm.yy
10.1.2 Cycle with Storage Activation and Output Format
The
Cycle
is used for cyclic storage and outputs of measuring data on the in-
terface (it corresponds to the print cycle of other ALMEMO
®
devices, the mea-
suring cycle is no longer implemented). The storage activation in the cycle, i.e.
the cyclic recording of data in the memory is automatically switched on after a
reinitialisation but it can also be switched off, if required.
ALMEMO
®
2690-8
45
* TIMES - CYCLES *
±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±
Time: 12:34:56 Date: 01.01.04
Cycle:
00:00:00
Storing: Ø
Sleep: -
Output form:
Columns
Conv. rate: 10M/s Cont: Ø
Output: -
Storing: -
Measurement:
Start time:
07:00:00
Start date:
01.01.04
End time:
17:00:00
End date:
01.01.04
PRINT ESC
* ALMEMO 2690-8 *
±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±
PROGRAMMING-Menus:
Times, cycles
Recording to memory ©
Output from memory
Sensor programming
...Special functions
Device configuration
Output modules
Power supply
_____________________
Menu1 ASSISTANT-Menus
Menu2 MEASURING-Menus
POFF *ON F MENU1 MENU2
