Measuring using Measuring-Menus
9. MEASURING USING MEASURING-MENUS
After the first switch-on, the device shows the
menu
Meas. points list
(s. 9.5.3). It offers a
good overall view over the whole measuring
system. This is also where to control, if time
and date are right. If not, there is the possibility
to programm them immediately (s. 8.4 and
8.5). Additionally, you can already see conti-
nuously the measured values of all connected
sensors and measuring channels. It is even
possible to assign extra additional functions
like comment, range, max values and limits
with the cursor keys
or
. If you
programm the cycle timer (s. 9.3.2) you can
start the first measurement with the key
<START>
and cyclically record the mea-
sured values. If a printer or terminal is connected, all values are also put out
online. After selecting the channels, it is also possible to programm measuring
points. To select other measuring menus, press key
<ESC>
.
Menu selection
The data logger 2690-8 provides a series of
prefabricated measuring menus for a best
possible display of the measured values and
corresponding function values. They are called
up in the selection
MEASURING-Menus
and dif-
fer in the number of measuring points (1 to 20),
in the display of measured values in different
sizes of the digits (4, 8, 12 mm) or as bar or
line chart and in the arrangement of functions.
If this does not come up to your expectations
you can arrange the 3 user menus U1 to U3
yourself from over 50 functions (s. 9.7).
Call up the menu selection with key:
<ESC>
Select a menu with keys:
or
...
Call up the selected menu with key:
The most important functions for controlling the measuring operation are alrea-
dy available in the measuring menus and can be programmed there directly.
For a special programming of the sensors or the device, there are extra
PRO-
GRAMMINIG -Menus
and for special functions
ASSISTANT-Menus
.
They are selected with the keys:
<MENU1>
or
<MENU2>
.
ALMEMO
®
2690-8
21
C © REC COM l© ©l R01 * ´´´´´´µµµµ¶
±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±
Meas.points list: Comment
Time: 12:34:56 Date: 01.01.04
Cycle-timer:
00:00:30 nS
00: 23.12 °C Temperatur
01: 11.37 mls Velocity
02: 123.4 mV U2.4
10: 53.6 %H r.Humidity
20: 15.2 °C Dew point
30: 11.2 glk a.Humidity
START MANU F PRINT ESC
* ALMEMO 2690-8 *
±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±
MEASURING-Menus:
Standard display ©
U1 Meas. value correction
U2 Averaging
U3 Volume flow
Data logger
Multi channel display
*List of measuring points
Bar charts
Line diagram
_____________________
Menu1 PROGRAMMING-Menus
Menu2 ASSISTANT-Menus
POFF *ON F MENU1 MENU2
