2
16
1
2
1
2
4.1) Peak
A peak is available for the AX-8 to protect it from the sun and/or stones. It can easily be adjusted
from the outside and is removable.
4) ACCESSORIES
4.1.1) Adjusting the peak
N.B. Never force the front to reach the required angle of
inclination.
Release the peak by manually loosening the plastic screw un-
der the peak, as shown in the figure, and releasing the plastic
cursor (1).
To adjust the peak, lower or raise it to achieve the required
inclination angle (2).
To lock the peak in place, tighten the plastic screw.
N.B. When using the helmet on road, adjust the peak to
the highest position.
4.1.2) Peak Removal/Installation
To completely remove the peak from the shell, starting from
one side of the helmet, loosen the aluminium screw at the side
which holds the peak in place (1).
Repeat the operation on the other side.
Then manually loosen the central plastic screw under the peak
(2) and remove it.
1
2
3
1
2
3
CLICK !
