2
11
THIS HELMET’S SHELL IS MADE OF FIBER
THIS HELMET’S LINER IS MADE OF POLYSTIRENE (EPS)
Front inlets incorporated into
the edge of the visor
1
2
3
4
CLICK!
CLICK!
2) INNERS
The cap and right and left cheek pads are removable and washable. To remove and install the
inners, follow the instructions and observe the figures below. To wash the inners, please see the
“Safety Warning” booklet.
2.1) Cheek pad Removal/Installation
Cap
Right cheek pad
Left cheek pad
To remove the cheek pads, grip them at the front near the hel-
met chin strap and pull in the direction of the arrow to free
them from the press studs (1).
Insert the plastic band between the EPS shell and the outer shell,
moving in the direction indicated by the arrow and pressing the
press studs in place (4). Check that the cheek pads are perfectly
secured to the helmet.
N.B. Ensure that the plastic band is correctly centered and
inserted between the EPS polystyrene inner and the outer
sheel so that the fabric of the cheek pads does not crease.
Remove the plastic band positioned between the outer shell
and the EPS shell, moving in the direction indicated by the
arrow, and remove the cheek pads, passing the closing strap
through the holes and extracting them from the helmet (2).
To refit the cheek pads, slide them into the helmet, slotting the
strap into the appropriate hole (3).
