AG-tronik M1 AND REGULATOR PR-9
INSTRUCTIONS FOR USE – rev. 2017-04
14
8. OPERATION DESCRIPTION
– AUTOMATIC CONTROL
In automatic control, set hectare dosage is controlled by AG-tronik. Of course, all of the
following conditions must be met:
correct choice of spraying parameters, such as correct choice of spraying speed,
correct choice of nozzles...
correct input of constants of flow and speed sensors
correct input of working width
Ensure the following when spraying:
correct choice of agent
correct calculation of concentration
appropriateness of spraying according to weather conditions
If the conditions above are met, then spraying with AG-tronik is very simple. The operator
must only keep driving in a steady manner, the speed being in accordance with nozzle
functioning capability (TR, ITR, ID, IDK 2-20 bar) and consideration of the minimum speed
(settings AG-tronik).
Press button
to turn on Ag-tronik. Individual sections are turned on by pressing
button
. In automatic control, key
is turned on (in
upper right corner lights LED). Keys for manual setting of pressure
DO NOT
function
in automatic control.
Spraying or preparation for spraying is done in the following manner:
8.1. Preparation for spraying
First we check if correct parameters are input in the program.
Fill the sprayer partially with water and test flow sensor functioning (when all nozzles
are open – diversion valves on the regulator, check the current flow on the display OF
AG-tronik). Sum of flow of all working nozzles must be equal to displayed flow on AG-
tronik.
Fill the tank with water to the top.
Go to the field or treatment location.
Check functioning of speed measuring during drive.
Fill the tank with chemical agent and turn on mixing. During preparation of
chemicals, all manual valves for mixing and central valve are open. If the central
