AG-tronik M1 AND REGULATOR PR-9
INSTRUCTIONS FOR USE – rev. 2017-04
31
Figure 45
In field D enter the spacing in plantation to be treated. When you press button
value D
starts to flash. Using the buttons
and
set new value. With button
confirm
the entry.
Figure 46
If we are finished typing, pressing button
restore main menu.
9.8. Nozzle settings
This section is the most extensive and it's important that you understand it. When using
electronic devices is very important that the device, in this case, the AG-tronik, knows how
you have configured the sprayer, or if you made any changes (replacing the nozzle, shut down
the nozzle or par of the nozzles, using a different nozzle ...) to inform AG-tronik of such
changes AG. Only then can you expect proper functioning of the sprayer.
The regulating unit in the sprayer is slightly more complicated than for other such machines,
as it allows the use of various nozzles on one segment, use of a different number of nozzles on
the left and right side, which is important for terraced spraying and also may be used flow
adjustable nozzles .... It is important that you measure the flow of such a nozzle at sprinkling
pressure and enter the value in the AG-tronik.
