AG-tronik M1 AND REGULATOR PR-9
INSTRUCTIONS FOR USE – rev. 2017-04
49
Deleting:
This part of program is intended for deleting existing lots. If you wish to delete a lot, move
selection frame to line
DELETE
. Press button
to delete selected name. Press button
to return to basic menu "WORK".
10.4. Analysis
In window ANALYSIS, display shows current data or spraying parameters, which are
achieved during spraying. Data is calculated under the condition that:
Analysis is activated.
Required information is input in window "WORK".
If the constants in program PROGRAMMING are input correctly and you are spraying,
analysis displays data, which is important for spraying.
Enter window "ANALYSIS" by selecting icon
and confirming it with confirmation
button
. The display shows:
Figure 78
Under the title ANALYSIS, word RUN or OFF also appears and it describes status of
analysis. If analysis is activated, RUN is shown next to ANALYSIS. If analysis is deactivated,
word OFF is displayed.
Use button
and
to move around analysis list. The display shows data in two lines:
