3 Devices and Operating Elements
38
Two-wheel tractor
agria 3600
Front implement attachment
Attachment and removal only when the
engine is switched off!
•
Remove the protective plastic cap from the
implement connection pin.
•
Ensure that the contact surfaces on two-
wheel tractor and implement are clean and
greased. Clean and grease if necessary.
Gear shifting in position "O".
In the unit driven by the PTO shaft:
Set the PTO shaft shifting rod on the two-wheel
tractor to "O".
Press down and hold the latch (1).
Insert the implement until it hits the stop col-
lar. Release the latch (1).
The locking pin must now automatically go down
and lock into place. If not: Slightly rotate the
implement to the left or right.
Removing the implement
Press down and hold the latch (1).
Pull the implement out of the implement con-
nection, and release the lever.
•
Slip the protective cap over the implement
connection pin.