manualshive.com logo in svg

Agria 2500 Hydro, Operating Instructions Manual, Page: 9 / 70

Share
Download
Agria 2500 Hydro Operating Instructions Manual Download Page 9

agria-

Two-Wheel Tractor 2500 Hydro

9

1

Careful with rotating tools – keep at a
safe distance!

Beware of coasting tools. Before you
start any maintenance or repair on them,
wait until tools have come to a complete
stop.

Foreign powered parts shear and crush!

Riding on the attachment during opera-
tion is not permitted.

Implements and weights affect the driv-
ing, steering, braking, and tip-over char-
acteristics of the two-wheel tractor.
Therefore, ensure steering and braking
functions are sufficient. Match operating
speed to conditions.

Do not change settings of governor. High
engine speed increases risk of
accidents.

Working Area and Danger
Zone

The user is liable to third parties work-
ing within the two-wheel tractor’s
working range.

Staying in the danger zone is not per-
mitted.

Check the immediate surroundings of
the two-wheel tractor before you start it.
Watch out for children and animals.

Before you start work, clear the area
from any foreign object. During opera-
tion, always watch out for further objects
and remove them in time.

For operation in enclosed areas, ensure
that a safety distance is kept to enclo-
sures to prevent damage to tools.

Operation and
Safety Devices

Before you start the engine

Become familiar with the devices and
operating elements and their functions.
Above all, learn how to turn the engine
off quickly and safely in an emergency
situation.

Ensure that all protective devices are
mounted and positioned to provide pro-
tection.

With no implement mounted, make sure
PTO-shaft is covered with the protec-
tive cap.

Starting the engine

Do not start engine in closed rooms. The
carbon monoxide contained in the ex-
haust fume is extremely toxic when in-
haled.

Before you start the engine set all oper-
ating elements to neutral or idling posi-
tion.

For starting the engine, do not step in
front of  the two-wheel tractor and the
implement.

Do not use assist-starting liquids when
using electrical assist-starting devices
(jumper cable). Danger of explosion.

Operation

Never leave the operator’s position at
the steering handle while two-wheel
tractor is at work.

Never adjust the operating handles dur-
ing work – danger!

1. Safety Instructions

Summary of Contents for 2500 Hydro







































































Reviews:

No comments