manualshive.com logo in svg

Agria 2500 Hydro, Operating Instructions Manual, Page: 12 / 70

Share
Download
Agria 2500 Hydro Operating Instructions Manual Download Page 12

12

agria-

Two-Wheel Tractor 2500 Hydro

1

Do not spill any fuel, use a proper filling
device (e.g. funnel).

In case of fuel-spillage, pull the two-
wheel tractor away from the spillage
before you start the engine.

Make sure fuel is of specified quality.

Store fuel in approved cans only.

Liquids leaking under high pressure, e.g.
fuel, can penetrate the skin and cause
severe injuries. Immediately see a doc-
tor.

Store anti-corrosive agents and stabi-
lizing liquids out of reach of children. If
sickness and vomiting occur, see a doc-
tor. If  fuel has contacted eyes, rinse
them thoroughly, avoid inhaling of va-
pours.

Read and observe enclosed instruc-
tions.

Before you dispose of opened and
seemingly empty pressurised tins (e.g.
of assist-starting liquids) make sure they
are completely empty. Empty them in
ventilated places safe from spark for-
mation or flames. If necessary, dispose
of tins in hazardous waste deposits.

Be careful when draining hot oil, dan-
ger of burns.

Make sure oil used is of specified qual-
ity. Storage is in approved cans only.

Dispose of oil, greases, and filters
seperately and properly.

Hydraulic System

The hydraulic system is subjected to
high pressure.

When connecting hydraulic motors, en-
sure the specified connection of the hy-
draulic hoses.

Hydraulic oil emerging under high pres-
sure may penetrate the skin and cause
serious injuries.

In case of injuries, immediately consult
a physician – risk of infections.

Prior to works on the hydraulic system,
render the latter pressureless and shut
down engine (specialized workshop).

When searching leakages, use suitable
aids considering the risk of injuries (spe-
cialized workshop).

Regularly check hydraulic hose lines for
damage and ageing and replace them,
if necessary.

Only use original agria hydraulic hoses.

Tyres and
Tyre Air Pressure

When working on wheels, make sure
two-wheel tractor is parked properly and
secured against rolling off.

Any repairs are to be carried out by
trained mechanics only and with the
appropriate tools.

Regularly check tyre air pressure. Ex-
cessive pressure may cause bursts.

1. Safety Instructions

Summary of Contents for 2500 Hydro







































































Reviews:

No comments