agria-
Two-Wheel Tractor 2500 Hydro
27
3. Devices and Operating Elements
Steering Handle Swinging
Buffer
The steering handle is rubber-cushioned,
the optimum damping effect is achieved
if the 2 cushion stops at the front of the
lower bar are set in such a way that in a
neutral position, with the bar unstressed,
on each side a gap of A = 0,2 mm is
maintained.
Another setting can be made here as
required individually.
Adjustment:
l
Loosen hex. screw (2)
l
Adjust cushion stop (1) by turning in
the direction of the above mentioned gap
l
Re-tighten hexagonal nut (fix with lock-
nut)
Lifting point
There are hooks on both sides of the
engine flange (A/29) for the attachment
of straps for loading or clamping.
Attachment points:
l
Machine without implement:
Strap on the hooks (A/29) and strap
around the PTO-drive housing
l
Machine with mounted implement:
Strap on the hooks (A/29) and strap on
the implement.
In order to avoid damage to the
electrics on the lower bar and
on the swinging bar bearing, do
not attach loading and clamping
straps on the lower bar and
steering.
A/29
3