manualshive.com logo in svg

Agria 2500 Hydro, Operating Instructions Manual, Page: 8 / 70

Share
Download
Agria 2500 Hydro Operating Instructions Manual Download Page 8

8

agria-

Two-Wheel Tractor 2500 Hydro

1

Before starting the engine, read the
operating instructions and note:

Warning  

This symbol marks all paragraphs in
these operating instructions which affect
your safety. Pass all safety instructions
to other users and operators.

Due Use

The two-wheel tractor is a hand-
controlled automatic single-axle
machine which can power and/or pull
various implements approved by the
manufacturer. Areas of application are
for such as turning over the ground,
mowing grass and meadowland, snow
clearance and sweeping (due use).

Any other type of operation is
considered undue. The manufacturer is
not liable for any damage resulting from
undue use, for which the risk lies with
the user alone.

When the single-axle tractor/the tool
carrier/the multi-purpose machine is
used on public roads, the local national
road traffic rules must be observed, e.g.
reflectors, lights.

The single-axle tractor/the tool carrier/
The multi-purpose machine is not
intended for use with a trailer on public
roads or as as a tractor unit without
implements.

Due use includes compliance with
manufacturer’s instructions on
operation, maintenance and repair.

Any unauthorized changes to the two-
wheel tractor render manufacturer
liability null and void.

1. Safety Instructions

General Instructions on
Safety and Accident
Prevention

Basic Rule:

The standard accident prevention
regulations must be adhered to, as well
as all other generally accepted rules
governing operational safety,
occupational health and road traffic
regulations.

For drives on public roads, the latest
traffic code applies.

Accordingly, check the two-wheel tractor
for road and operational safety each
time you take up operation.

Only persons familiar with the two-wheel
tractor and instructed on the hazards of
operation are allowed to use, maintain
and repair the two-wheel tractor.

Young persons of 16 years or younger
may not operate the two-wheel tractor!

Only work in good light and visibility.

Operator’s clothes should fit tightly.
Avoid wearing loosely fitting clothes.
Wear solid shoes.

Note the warning and instruction signs
on the two-wheel tractor for safe
operation. Compliance is for your own
safety.

When transporting the two-wheel tractor
on vehicles or trailers outside the area
to be cultivated, ensure that the engine
is shut off.

Summary of Contents for 2500 Hydro







































































Reviews:

No comments