50
agria-
Two-Wheel Tractor 2500 Hydro
5
5. Maintenance
Machine
Transmission
I
Transmission oil is also
hydraulic oil
When changing to Bio
hydraulic oil HEES, drain oil
filling and twice rinse the
system (– see after-sales
service information).
Check oil level in transmission
each
time before you take the machine into operation
and after every 25 operating hours.
With the
machine parked in horizontal position, the oil level
must be up to the level of the
fillling opening (A/1),
refill hydraulic oil, if necessary.
Transmission oil filter change after the first
50 operating hours and then always after 200
operating hours
l
Tilt machine to the rear onto the connection
flange
l
Remove protective cover
slightly loosen
4 screws and pull cover off downwards
l
Screw out oil filter
(A/28)
and replace it – for new
filter, wet the sealing ring with some oil
l
Replace protective cover
l
Dispose of oil filter as directed.
Transmission oil change with simultaneous
oil filter change after the first 50 operating hours
and after every 600 operating hours while the
engine is still warm.
l
Keep oil filler plug (1) and drain plug (4) ex-
tremely clean as well as surrounding parts to
prevent dir t from penetrating into the
transmission.
l
Open drain plug, collect old oil in proper
container and dispose of properly.
l
Clean drain plug; the drain plug has a
magnetic core and therefore attracts metallic
powder.
l
Check sealing rings and exchange, if neces-
sary.
l
Screw in drain plug with o-ring and tighten.
l
Fill in fresh hydraulic oil, up to the
fillling
opening
.
l
For proper oil quantity and quality, refer to
chapter “Specifications”.
l
Close filling opening with plug/dip-stick.
6
6
6
6
6
(50 h) 600 h
6
6
6
6
6
(50h) 200 h
A/28
A/1
A/24