38
SBI521 Service Manual
4 Setup Mode
The setup menu consists of five different sub-menus. Within each sub-menu are
different menu options.
The config/cal switch must be set in the ON position in order to make changes to
specific parameters.
4.1 Entering the Setup Menu
1.
Power on the indicator by pressing and holding the
[ON/OFF]
key.
2.
Press the
[HOLD/SETUP]
key for 3 seconds. The indicator shows "
Config
" to
indicate that you are in Setup Menu mode.
4.2 Navigating the Setup Menu
1.
Once in the “
Config
” menu, use the
[NG/TOTAL]
(up arrow) or
[PRINT/FUNC]
(down arrow) key to move to the next available menu in the Setup Menu.
2.
Use the
[TARE/PRESET]
key to access the desired menu.
3.
Use the
[NG/TOTAL]
(up arrow) or
[PRINT/FUNC]
(down arrow) key to
choose a sub-menu (parameter).
4.
Use the
[TARE/PRESET]
key to select the options within the sub-menu.
5.
Use the
[NG/TOTAL]
(up arrow) or
[PRINT/FUNC]
(down arrow) key to make
a change. Press the up or down arrow until the desired choice is on the
display.
6.
Press the
[TARE/PRESET]
key to select the
CONFIG
USER
CAL
MISC
TEST
