3
9
Identify the three fixing points
for the gearbox casing
24A
(circled, above, viewed from below).
Note also the position of the end
of the line
23D
. Working with the
sub-frame the right way up, position
the gearbox casing, as shown on the
right, with the screw eyelets aligned
with the fixing points. The line
23D
fits over the edge of the casing and
the end goes into the socket in the
casing (circled in red, right).
7
Fit the tank end
24G
to the tank
24F
.
This is a push-fit connection. Fit parts
24I
and
24H
into the corresponding holes
in the tank cap
24G
, as shown in the inset,
right. Again, these are push-fit connections.
The pins on parts
24I
and
24H
are spaced
differently to ensure you fit them correctly.
8
Looking at the underside of the sub-frame, identify
the fixing point for the tank (circled). Fix the tank
24F
in place with an
AM
screw, as shown in the inset.
9
7
8
When fitting
the gearbox casing,
offer it up from below,
but ensure the fixing
tabs are in the correct
positions, as shown in
the diagram below.
4
24F
24H
AM
24I
24G
24F
24G
23D
24A
19
19
AGORA
MODELS
RM 857
