AGORA
MODELS
46
1
3
2
4
Take the reverse lamp and its lens. Note the holes on the lamp (arrows)
and the pegs on the lens (circled) for fitting the parts together.
You may need to use a sharp knife to remove excess paint from inside
the holes of the lamp.
Align the reverse lamp with the three holes on the rear end panel from
Stage 98 as shown. Fit the lamp in place (inset).
Firmly press the lens into the reverse lamp using the pegs and holes
as a guide.
Holding the lamp in place, turn the panel over and secure the parts
together using an AG03 screw.
Stage 99: Fitting the Rear End Panel
AG03
