AGORA
MODELS
13
1
3
2
4
You’ll need the body assembly from the previous stage along with the
floor assembly from Stage 90.
Plae the circuit board on your work surface as shown, then take the
electrical wire labelled ‘01’ and plug it into the socket marked ‘1.
Make sure to handle the circuit board carefully as you install it, holding
by the edges when necessary.
Note that the sockets on the board are numbered from 1 to 10 (circled).
Plug wire ‘02’ into socket ‘2’, and wire ‘03’ into socket ‘3’ as shown.
Stage 93: Fitting the Floor with the Electrical
Circuit Board
