AGORA
MODELS
4
1
3
2
4
Take the body assembly from Stage 89 and the driver’s door from
Stage 1.
Fit the two screw holes and rectangular notch over the corresponding
parts of the body and press firmly into place. Note that the screws
(circled, inset) can get in the way, so take care when fitting the trim.
Lay the body assembly on a protective surface, then align the right
body door frame trim with it as shown, noting the two screw holes and
rectangular notch in the trim.
Next take the driver’s door and locate the screw hole lugs on the
hinge. Align the lugs with the corresponding holes on the outside of
the body as shown.
Stage 91: Attaching the Driver’s Door and Trim
