AGORA
MODELS
31
20
22
21
23
Take the bulb end of the LED (wire ‘08’) and push it into the inner slot
of the rear left light as shown.
To keep the wires tidy before you attach the wheel base onto the body,
use the pegs (circled) to guide the wires. Stick the wires in place using
a strip of the sticky tape provided. We recommend cutting the strips in
half so that you can stick the wires down at other points as needed.
Then take the remaining LED from wire ‘06’ and push it through the
outer slot of the rear left light.
Repeat for the wires from the other rear light, using the guides and
then sticking the wires in place with a strip of tape.
Stage 96: Connecting the Wiring, Right Rear Light,
Fuel Tank, and Bonnet
