AGORA
MODELS
30
16
18
17
19
Followed by wire ‘09’ into socket ‘9’. With all the wires plugged into the
circuit board, you’ll now need to connect them all up.
Take the bulb end of the LED (wire ‘10’) and push it into the inner slot
of the rear right light as shown.
Take the wire marked ‘01’ from the clutch bellhousing and plug it into
the wire marked ‘01’ connected to circuit board. Continue matching up
all the loose wires until they are all connected to the circuit board.
Then take one of the LEDs (wire ‘06’) and push it through the outer
slot of the rear right light.
Stage 96: Connecting the Wiring, Right Rear Light,
Fuel Tank, and Bonnet
