• {Lock all expect volume and power}: Disable all the keyboard function except the
[ ] [ ]
and
[ ]
POWER
button:
NOTE:
To disable the lock function from
Local KB lock
or -
RC lock
item, press buttons
[ ]
and
1 9 9 8
on
the remote control.
ANTI-BURN-IN
For video input sources, you may choose {On} to move the screen image automatically to protect
the display from “burn-in” or “after-image” symptoms 30 seconds after not operating the display.
Smart power
Choose a backlight level to optimise dynamic power consumption and picture contrast.
The options are: {Off}, {Standard}, {Best Power}, {Best Picture}.
Wake on lan
Choose {On} and you can turn on the display by network.
Switch on state
Choose the display status used for the next time you connect the power cord.
• {On} - The display will turn on when the power cord is connected to a wall outlet.
• {Standby} - The display will remain Standby when the power cord is connected to a wall outlet.
• {Last status} - The display will return to the previous power status (on/off/standby) when
removing and replacing the power cord.
LED
Choose {Off} to turn off the indicator.
Switch on delay
Adjust the power-on delaying time (in seconds) allows a sequential powering-on for each display
by their ID number when multiple displays are connected.
Logo
If selected {On} ,when the display Switch on,it will show the logo first.
APM
Choose {On}. Then, when no signal, the display will automatically turn off.
Information OSD
When you press
[ ] POWER
button to turn on the display from standby mode or change the input
signal, the information OSD is displayed on the upper left corner of the screen.
Choose {Off} to turn off this function.
DisplayPort Ver.:
Set the DisplayPort version to 1.1a or 1.2, this setting is only valid on DisplayPort input and output,
1.1a: Switch DisplayPort Ver. to 1.1a(default), the DisplayPort output is the clone of the DisplayPort
input.
1.2: Switch DisplayPort Ver. to 1.2 to support MST(Multi-Stream Transport)
CHANGE YOUR SETTINGS
38
Summary of Contents for PM-65P
Page 1: ......
