2.3.2 ID Remote Control
You can set the remote control ID when you
want to use this remote control on one of
several different displays.
Press [ID] button. The red LED blinks twice.
1. Press [ID SET] button for more than 1 second
to enter the ID Mode. The red LED lights up.
Press the [ID SET] button again will exit the ID
Mode. The red LED lights off.
Press the digit numbers [0] ~ [9] to select the
display you want to control.
For example: press [0] and [1] for display No.1,
press [1] and [1] for display No.11.
The numbers available are from [01] ~ [255].
2. Not pressing any button within 10 seconds will
exit the ID Mode.
3. If an error pressing of buttons other than the
digits occured, wait 1 second after the red LED
lights off and then lights up again, then press
the correct digits again.
4. Press [ENTER] button to confirm. The red LED blinks
twice and then lights off.
NOTE:
• Press [NORMAL] button. The green LED
blinks twice, indicating the display is in normal
operation.
• It is necessary to set up the ID number for
each display before selecting its ID number.
PARTS AND FUNCTIONS
14
Summary of Contents for PM-65P
Page 1: ......
