Agilent Technologies USB/GPIB Interface Converter 82357A, User Manual

Page: 17 / 70

Chapter 1 17
Installing the 82357A
Step 3: Connecting the 82357A
Observing Windows Plug and Play Manager
Sequence (Windows XP Only)
When an 82357A is first plugged into a USB port, for Windows XP ONLY,
a Windows Plug and Play Manager installation sequence may be displayed.
Introduction
The following sequence only appears when an 82357A is initially plugged
into a USB port. The sequence appears each time an 82357A with a new
serial number is installed or when an 82357A is installed in a new USB port.
For example, if an 82357A with Serial Number US12345678 is initially
plugged into USB port #1, the sequence may appear. If this 82357A is
configured using the sequence, the next time this 82357A is plugged into
USB port #1, the sequence will not appear.
However, if another 82357A is plugged into USB port #1 or if the 82357A
with Serial Number US12345678 is initially plugged into USB port #2, the
sequence may also appear.
NOTE
This section shows typical displays for a Windows XP Professional
operating system ONLY. Similar displays may appear for Windows
98 SE, Windows 2000, or Windows Me operating systems.
NOTE
The displays in the following sequence assume you have installed the
Agilent IO Libraries Suite as shown in Step 2 - Installing Agilent IO
Libraries Suite. If you have not installed the libraries, STOP and do
Step 2 before continuing.