Calibrator Output Operations
2
U1401A User’s and Service Guide
39
used to indicate the start or end position. The last three
digits of the primary display are used to indicate the
number of steps (the number of steps from start to end).
1
Press
MODE
to cycle through position (start or end),
number of steps, and amplitude adjustment. The digit to
be adjusted will flash on the display.
•
For adjusting the amplitude, press
and
to select
the digit to be adjusted, then press
and
to
adjust the value of the selected digit. The amplitude
can be set to any value within the selected output
range (±1.5 V or ±15 V for constant voltage output, ±25
mA for constant current output).
•
For adjusting the number of steps, press
and
to
select the digit to be adjusted, then press
and
to adjust the value of the selected digit. The number of
steps can be set within the range of 0 to 999 steps.
•
Press
for more than one second to directly reset
the time interval and amplitude of the present step to
zero.
2
Press
OUTPUT
to save the settings.
3
4
5
6
3
4
5
6
4
Summary of Contents for U1401A
