Agilent Technologies NFA Series, Performance Verification And Calibration Manual

Page: 94 / 184

82 Chapter 2
Test Descriptions
Measurement Jitter
Required Test Equipment
Test Setup
Figure 2-24 Measurement Jitter Test Setup
Table 2-21 Required equipment for Instrument Measurement Jitter Test
Equipment description Critical specification for equipment
substitution Recommended model
Noise source Frequency Range: 1 GHz
Typical ENR: 4 - 7dB
Connection: 3.5 mm(M) or N Type(M)
346A Standard or option
001
Adapter 3.5 mm Precision (F) to 3.5 mm(F) 83059B
BNC cable Length 122 cm (48 in.), Frequency
10 MHz 10503A
346A
346A
Adapter
N8973A
Type N
Opt 001
N8974A
3.5mm
Std.
OR
Input
BNC Cable
Source Supply
+28V Noise
OR
OR
NOISE
SOURCE
NOISE FIGURE
ANALYZER
Load ENR Data from C:
Insert ENR Disk
and Load from A:
Create File from Data on
Noise Source Label
N8975A