Agilent Technologies Infinium DCA 86100A, Service Manual

Page: 35 / 268

2-7
Automated Testing and the VISION Test System
Controller Disk Drive Backup and Restore
Table 2-1. Comparison of Manual Tests to Automated Software Tests
86100A/B/C Software
Performance Verification 86100A/B Manual
Performance Verification
Difference
Type of
Verification
Check Internal Temperature Not Checked New test Functional
Trigger Port Not Checked New test Functional
Gated Trigger Gated Trigger Same Functional
Divided Trigger 86100C Opt
001 N/A (86100C only) New test Functional
Rear Panel 15 Volt Output
86100A/B Not Checked New test for
86100A/B only Functional
Module Calibration Module Calibration Same Functional
Delay & Timebase Accuracy Delay & Time Interval More points tested in
software Specification
Fine Timebase (86100C)
a
a. Due to its complexity, the Fine Timebase Accuracy for the Agilent 86100C can only be tested with an
automated test system.
— New test for 86100C
only Specification
Trigger Level Accuracy Not Checked New test Functional
Calibrator Accuracy Front Panel Calibrator More points tested in
software Specification
Trigger Jitter Standard (Trig) Jitter Verification,
Trigger Sensitivity
Standard More points tested in
software Specification
Trigger Jitter Opt 001 Trig Verification Opt 001
Trigger Sensitivity 001 More points tested in
software Specification
Pattern Trig 86100C Opt 001 N/A (86100C only) New test Functional
Optical Power Not Checked New test Functional