Agilent InfinityLab LC Series Multicolumn Thermostats User Manual
67
3
Using the Module
Installing and Using Column ID Tags
1
Remove any tube guides and tube clip holders that may
already be installed on the sides of the MCT cover.
2
Unlock the left and right (G7116B only) side cover
inserts by pushing them to the rear and put them aside.
3
Identify the left and right (G7116B only) column ID mod
-
ule. The ID sockets 1 to 4 are numbered from top to bot
-
tom.
4
Take the end of the preinstalled flex-board connector
out of the holder.
1.
2.
