Agilent Technologies G1314B, User Manual

Page: 43 / 208

Agilent 1260 Infinity VWD User Manual 43
Installing the Detector
3
Installing the Detector
Installing the Detector
For other cables see below and section “Cable Overview” on page 152.
Instant Pilot (G4208A) is optional.
1 Install the LAN interface board in the detector (if required), see
“Replacing the Interface Board” on page 134
2 Place the detector in the stack or on the bench in a horizontal position.
Parts required # p/n Description
1 Detector
1 Power cord
1 LAN cable (cross-over or twisted pair network cable)
1 Agilent ChemStation or other control software
1 G4208A Instant Pilot
Preparations Other LC modules must have appropriate firmware installed to work with the detector.
• Locate bench space.
• Provide power connections.
• Unpack the detector.
N O T E
Before adding the detector into an existing system assure that the existing modules have
been updated to firmware revision that is supported by the control software.