Agilent Technologies Agilent G3215A, User Manual, Page: 9 / 42

Introduction 1
Mass Spec Bench User Guide 9
Electromagnetic compatibility
This device complies with the requirements of CISPR 11. Operation is subject
to the following two conditions:
• This device must not cause harmful interference.
• This device must accept any interference received, including interference
that can cause undesired operation.
If you notice harmful interference to radio or television reception, and the
interference stops when you turn off the Mass Spec Bench, do these steps:
• Relocate the radio or antenna.
• Move the device away from the radio or television.
• Plug the device into a different electrical outlet, so that the device and the
radio or television are on separate electrical circuits.
• Make sure that all peripheral devices are also certified.
• Make sure that appropriate cables are used to connect the device to
peripheral equipment.
•
Consult your equipment dealer, Agilent Technologies, or an experienced
technician for assistance.
• Changes or modifications not expressly approved by Agilent Technologies
could void the authority of the user to operate the equipment.
Sound emission certification for Federal Republic of Germany
• Sound pressure – Lp < 70 dB according to EN 27779:1991
• Schalldruckpegel – LP < 70 dB am nach EN 27779:1991
Cleaning
To clean the Mass Spec Bench:
1 Clean the air intake grates with a damp cloth.
2 Wipe out excess oil in the pump enclosure with a cloth. Dispose of dirty
cloths in accordance with local laws or regulations.
3
Wipe the outer surfaces with a mild soap solution to remove any oil or dirt.