Agilent Technologies Agilent G3215A, User Manual, Page: 6 / 42

1 Introduction
6 Mass Spec Bench User Guide
General Information
The Mass Spec Bench is designed to comply with the International
Electrotechnical Commission (IEC) 61010–1 safety standard.
The Mass Spec Bench Power Supply (part number 5188-1164) complies with
applicable safety and Electromagnetic Compatibility (EMC) requirements,
including:
• CISPR 11/EN 55011: Group 1, Class A
• IEC/EN 61326
• AUS/NZ
• Canada ICES-001/NMB-001
The Mass Spec Bench is designed and manufactured under a quality system
registered to ISO 9001.
Information
The Agilent Technologies Mass Spec Bench meets the following IEC
classifications: Installation Category II, Pollution Degree 2, and Equipment
Class III (except for the power supply provided, which is Equipment Class I).
The Mass Spec Bench is designed to be used with complete equipment. It is not
an electrical enclosure and does not have a protective conductor (ground)
terminal intended to be connected to an external protective earthing
(grounding) system.
The Mass Spec Bench is designed and tested in accordance with recognized
safety standards and is designed for use indoors. If it is used in a manner not
specified by the manufacturer, the protection provided by the instrument can
be impaired. Whenever the safety protection of the Mass Spec Bench has been
compromised, disconnect it from all power sources and secure it against
unintended operation.
Refer servicing to qualified service personnel. Substituting parts or
performing any unauthorized modification to the instrument can result in a
safety hazard.