Agilent Technologies Agilent G3215A, User Manual, Page: 24 / 42

2 Installation
24 Mass Spec Bench User Guide
4
Lift the rear of the metal oil drip tray with the pump on it and rest it on the
frame of the Mass Spec Bench.
5 Lift the front of the metal oil drip tray with the pump on it and slide the
pump into the enclosure.
Figure 14 Tilting the Edwards Rough Pump
N O T E
Temporarily extend the castors to keep the Mass Spec Bench from moving while you install
the pumps into the enclosure.
C A U T I O N
To avoid possible equipment damage, make sure that the pumps are installed exactly
as shown in the next figures. Improper installation can cause the pumps to overheat
and turn off.