39
Agilent G3215A Mass Spec Bench User Guide
Agilent Technologies
4
Troubleshooting
Table 4
describes solutions to problems that can occur with Mass Spec Bench.
If your problem is not listed or the solution listed does not work, consult your
pump documentation or contact your Agilent service representative.
WA R N I N G
To avoid being burned by hot surfaces, wait for the pumps to cool down before
servicing or troubleshooting.
Table 4
Problems and solutions
Problem
Solution
Pump does not fit in Mass Spec Bench.
Check for proper orientation of the pump and
configuration of the vibration dampers. See
“Step 3.
Install the Rough Pumps inside Mass Spec
Bench”
on page 22. Call your Agilent service
representative if the orientation and configuration
are correct.
Mass Spec Bench does not turn on.
Check that the power supply is plugged securely into
both Mass Spec Bench and the wall outlet. If it is,
call your Agilent service representative. Do not
continue to use your rough pump in the Mass Spec
Bench.
Summary of Contents for Agilent G3215A
