Installation
2
Mass Spec Bench User Guide
17
6
Pull the ratchet handle contained within the castor and turn the ratchet in
a clockwise direction to move up the pad. See
Figure 6
.
Make sure to retract the pad completely into the castor body. If the ratchet
spins freely, use your finger to hold the gear inside the castor.
The castors contain rubber vibration absorbing pads that are extended to
help secure the Mass Spec Bench to the pallet. Each castor contains a pad.
These pads must be retracted so that the castors touch the floor.
Figure 6
Ratchet handle pulled out
7
When all four wheels are touching the pallet, lift the Mass Spec Bench off
the pallet.
Use at least four people (one on each corner of the bench) to lift to the floor.
WA R N I N G
To avoid personal injury, do not try to lift the Mass Spec Bench without assistance.
The bench weighs over 70 kg (155 pounds). Always use good lifting practices
appropriate for the installation.
Summary of Contents for Agilent G3215A
