Agilent Technologies Agilent G3215A, User Manual, Page: 28 / 42

2 Installation
28 Mass Spec Bench User Guide
Step 4. Attach the spray chamber exhaust hose
Do this step for LC/MS systems only.
1 Route the spray chamber exhaust hose through the hole in the Mass Spec
Bench surface.
2
Attach the spray chamber exhaust hose to the desolvation assembly. Use
the hose clamp to secure the chamber exhaust hose in place.
Step 5. Connect the power supply
Connect the power supply to the back of Mass Spec Bench by twisting the ring
on the circular connector of the power cord (see
Figure 19 ). Plug the pronged
end of the power cord into the wall outlet.
Figure 19 Connecting the power supply.
Plug in power supply cord here.