Agilent Technologies Agilent G3215A, User Manual, Page: 29 / 42

Installation 2
Mass Spec Bench User Guide 29
Step 6. Verify the installation
1 Press the on/off switch on the left side of the enclosure.
2 Check that:
• The green LED is lit and the fans are on.
• The temperature alarm is off and the red light is not lit. If either are on,
remove the access panels and lid. Refer to
Chapter 4 , “Troubleshooting”,”
for more information.
• The power cords are positioned so that they do not interfere with the
castors or dampening pads inside the castors.
Figure 20 Extendable rubber feet.
No cables or tubing should be
around the castors.