Agilent Technologies 969-9462, User Manual

Page: 288 / 306

17
Technical Information
Use
When the last digit is entered, the display shows:
D E L A Y E V E N A F T E R
T H R E S H O L D : X X X
where: XXX = YES or NO.
Press the CYCLE NUMBER push-button and select YES if relay
K2 must operate only after the run-up time or select NO when the
K2 operation is needed right from start of the turbopump and
after the rotational speed of the turbopump exceeds for the first
time the speed threshold value (see the preceding cycle diagram).
This function is factory-set to YES.
D E L A Y E V E N A F T E R
T H R E S H O L D : Y E S
Figure 39
288/306 Turbo-V 2000HT Controller User Manual / 87-900-913-01 (O )