Agilent Technologies 8614 B Series, User Manual, Page: 126 / 272

3-52
Function Reference
Peak Search
Peak Search
Places a marker on the highest amplitude trace point. If no marker is on, Marker #1 will be used
for the peak search.
Next Peak Down
Places the marker on the next highest peak from the current marker amplitude. This next highest
peak must meet the peak excursion and threshold criteria. If the specified marker is
OFF
, it will be
turned
ON
, placed at the center wavelength, and the search for the next maximum will begin from
that point.
Next Peak Left
Places the marker on the next peak located at a shorter wavelength than the current marker
wavelength position. This next peak must meet the peak excursion and threshold criteria. If the
specified marker is
OFF
, it will be turned
ON
, placed at the center wavelength, and the search to
the left will begin from that point.
Next Peak Right
Places the marker on the next peak located at a longer wavelength than the current marker
wavelength position. This next peak must meet the peak excursion and threshold criteria. If the
specified marker is
OFF
, it will be turned
ON
, placed at the center wavelength, and the search to
the right will begin from that point.
Active Marker....
Turns a particular marker
ON
or
OFF
. Turning a marker
OFF
will turn off any marker function that
was on for that particular marker. When the marker is turned
ON
again, all the marker functions
for that marker will be off.
The active marker is placed on the highest point of the active trace. If no marker is
ON
, Marker #1
will be turned
ON
and placed on the highest point of the active trace.
N o t e For addition information on setting the peak and pit excursion criteria, see “Peak Excursion” and
“Pit Excursion” on page 3-37.
See “Tips for Using Traces and Markers” on page 2-26