Agilent Technologies 8614 B Series, User Manual, Page: 103 / 272

3-29
Function Reference
Hold A...F None Min Max (trace)
Hold A...F None Min Max (trace)
Hold Max compares the current amplitude value of each point on the active trace in the current
sweep to the corresponding point detected during the previous sweep, then displays the maxi-
mum value.
Hold Min compares the current amplitude value of each point on a trace in the current sweep to
the corresponding point detected during the previous sweep, then displays the minimum value.
Hold None turns the Hold function off.
Key Path Traces > Hold None Min Max
Remote Commands CALCulate[1|2|3|4|5|6]:MAXimum:STATe
CALCulate[1|2|3|4|5|6]:MINimum:STATe
Integrate Limit
Calculates the power between Wavelength Marker 1 and Wavelength Marker 2 when the trace
integration function is on.
Once wavelength markers have been turned on, the total power integration marker search, and
wavelength sweep may be individually limited to the wavelength marker range.
Key Path Markers > More Marker Functions > Line Marker Menu > Advanced Line Mkr Functions >
Integrate Limit
Related Functions Sweep Limit, Search Limit
Remote Commands CALCulate:TPOWer:IRANge:LOWer
CALCulate:TPOWer:IRANge:UPPer
Light Source
Turns the desired light source on or off. The number and type of sources displayed depends on
the options installed.
Refer to “Operating the Internal White Light Source” on page 2-4