112
Chapter 1: Agilent Technologies 16712A 128K Sample Logic Analyzer
Using Symbols
the object file symbols are reloaded.
To delete object file symbol files
1. Select the
Symbol
tab, and then the
Object File
tab.
2. Select the file name you want to delete in the text box labeled,
Object
Files with Symbols Loaded For Label
.
3. Select
Unload
.
See Also
“Symbol File Formats” on page 123
To adjust symbol values for relocated code
Use this option to add offset values to the symbols in an object file. You
will need this if some of the sections or segments of your code are
relocated in memory at run-time. This can occur if your system
dynamically loads parts of your code so that the memory addresses
that the code is loaded into are not fixed.
To adjust symbol values for a single section of code
1. Select the
Symbol
tab and then the
Object File
tab.
2. In the
Object Files with Symbols Loaded For Label
list, select the file
whose symbols you wish to relocate.
3. Select the
Relocate Sections...
button.
4. In the
Section Relocation
dialog, select the field you wish to edit in the
section list.
5. Enter the new value for that field and press Enter on your keyboard.
6. Repeat steps 4 through 6 above for any other sections to be relocated.
7. Select
Close
.
To adjust all symbol values
1. Select the
Symbol
tab and then the
Object File
tab.
2. In the
Object Files with Symbols Loaded For Label
list, select the file
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
