P1512137 R3
53
Section 7.8. – Inspect the Hopper Flashing on page 55
Section 7.9. – Check the Roller Bearings on page 55
Section 7.10. – Check the Roller Lagging on page 56
7.13. Inspect Belt Lacing on page 60
When equipped:
Section 7.5. – Check the Gearbox Oil on page 54
Annually:
Section 7.11. – Tension the Conveyor Belt on page 56
Section 7.12. – Align the Conveyor Belt on page 58
Section 7.16. – Clean and Wash the Equipment on page 62
2–3 Years:
7.14. Replace the Belt Lacing on page 60
When equipped:
Section 7.6. – Change the Gearbox Oil on page 55
As Required:
When equipped:
Section 7.17. – Tension the Drive Belts on page 62
When equipped:
Section 7.18. – Align the Drive Belts on page 63
When equipped:
Section 7.19. – Replace the Drive Belts on page 63
Section 7.20. – Repack the Wheel Bearings with Grease on page 63
When equipped:
Section 7.21. – Check/Adjust the Truss Cables on page 64
7.15. Replace the Conveyor Belt on page 60
Section 7.22. – Pinion Gear Adjustment on page 66
7.3. Visually Inspect the Equipment
Check the following during a visual inspection:
1. Ensure all guards are in place and in good working order.
2. Examine the conveyor for damage or unusual wear.
3. Check tightness of bolts/nuts, fasteners, and hardware (re-torque if necessary).
4. Be sure all safety decals are in place and are legible.
5. Check that the discharge and intake area are free of obstructions.
6. Inspect all moving or rotating parts to see if anything has become entangled in them. Remove any entangled
material.
Lock out power before inspecting.
Æ
7.
When equipped:
Inspect hydraulic hoses and fittings for leaks and wear. Fix or replace where necessary.
8. Check wheel bolts are tight and examine tires for gashes, uneven wear, or loss of air pressure. See
for recommended tire pressure.
S-DRIVE STANDARD CONVEYOR – PORTABLE GRAIN BELT CONVEYOR
