1 - 13
Commissioning
You have installed the telephone system.
Now, only a few operations are necessary
before you are able to make telephone calls.
- Connect terminals. You can connect all
terminals that you are also allowed to
connect to the public telecommunications
network.
- Insert the Western plug on the ISDN con-
necting cable in the telecommunications
socket (ISDN line unit, IAE or universal line
unit UAE) of your ISDN connection.
- Switch on the telephone system by insert-
ing the mains plug.
- To avoid wrong dialling, dial a digit on an
a/b terminal with DTMF after installation.
The telephone system recognises the dial-
ling method in this way.
- If you switch the dialling method on an a/b
terminal from DTMF to pulse dialling, dial a
digit higher than 2.
- If you operate two terminals on one ter-
minal connection, both of them must dial
with the same dialling method.
Notes ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
- Once the telephone system has been
switched on, you can immediately make
internal and external telephone calls.
When an external subscriber calls, all con-
nected telephones ring according to the
telephone system's default settings ("as-
delivered" settings).
- By programming on a PC, you can set the
telephone system’s functions to suit your
needs. Remote setting by your specialist
dealer is possible.
