AGFA W Class, Operator'S Manual

Page: 60 / 132

50 W-Class
4.3 Quick Test Mode
This section explains the functions of the resident Quick Tests, accessible by
pressing the key on the Front Panel.
Notes: (1) With the exception of the Configuration Label, all Quick Test
labels require 4-inch (102mm) wide media to print the entire format. If
using narrower media, change the Label Width setting (Section
4.1.2) to match your media’s width to avoid printing on the platen.
(2) During any Quick Test, press the key or the
key to stop printing.
(3) Using the ‘Print Test Rate’ feature (Section 4.1.7), a time delay
can be set for printing labels in Quick Test Mode.
4.3.1 Print Quality Label
The Print Quality Label provides an indication of overall print quality at a pre-
selected heat and speed setting. This format consists of compliant bar codes in
fence and ladder orientations, assorted font sizes, and graphic fill patterns. These
can be used to ensure conformance, as well as aesthetics. To print a Print
Quality Label:
Press the key.
Use the key to scroll to ‘Print Quality Label’.
Use the key to select a quantity; see Section 4.0.3.
Press the key to start printing.